RoHS Recast Compliant M.2 2260 Flash Drive P200-M Product Specifications July 8, 2015 Version 1.2 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com M.2 2260 Flash Drive APM2T60P200xxxxAN-XTMX Features: Standard SATA Interface Compliance Temperature ranges Serial ATA Revision 3.1 compliance Operating: SATA 6.0 Gbps interface Standard: 0C to 70C ATA-8 command set Extended: -40C to 85C Storage: -40C to 85C Capacities 16, 32, 64, 128, 256 GB Supply voltage 3.3 V 5% Performance* Interface burst read/write: 600 MB/sec Power consumption (typical)* Sustained read: up to 520 MB/sec Active mode: 540 mA Sustained write: up to 180 MB/sec Idle mode: 105 mA Flash Management Connector type Built-in hardware ECC 75-pin SATA-based M.2 module pinout Static/dynamic wear-leveling Form factor Flash bad-block management M.2 2260 form factor S.M.A.R.T. Dimensions: 60.00mm x 22.00mm x3.65mm Power Failure Management ATA Secure Erase Shock & Vibration*** TRIM Shock:1500 G Vibration: 15 G NAND Flash Type: MLC MTBF: >2,000,000 hours Endurance 16GB: 14 TBW RoHS Recast compliant (complies with 32GB: 28 TBW 2011/65/EU standard) 64GB: 57 TBW Device Sleep mode (optional) 128GB: 114 TBW 256GB: 228 TBW *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **Non-operating 1 2015 Apacer Technology Inc. Rev. 1.2