RoHS Recast Compliant M.2 2280 Flash Drive P201-M Product Specifications (Toshiba 15nm) October 21, 2015 Version 1.0 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com M.2 2280 Flash Drive APM2T80P201xxxGAN-XTM1X Features: Standard SATA Interface Compliance Temperature ranges Serial ATA Revision 3.2 compliance Operating: SATA 6.0 Gbps interface Standard :0C to 70C ATA-8 command set Extended: -40C to 85C Storage: -40C to 85C Capacities 16, 32, 64, 128, 256 GB Supply voltage 3.3 V 5% Performance* Burst read/write: 600 MB/sec Power consumption (typical)* Sustained read: up to 430 MB/sec Active mode: 450 mA Sustained write: up to 160 MB/sec Idle mode: 95 mA Connector type Flash Management 75-pin SATA-based M.2 module pinout Built-in hardware ECC Form factor Static/dynamic wear-leveling M.2 2280 form factor Flash bad-block management Dimensions: 80.00x22.00x3.80, unit: S.M.A.R.T. Power Failure Management Shock & Vibration*** ATA Secure Erase Shock:1,500 G TRIM Vibration: 15 G NAND Flash Type: MLC MTBF: >2,000,000 hours Endurance SATA Power Management 16GB: 14 TBW RoHS Recast compliant (complies with 32GB: 28 TBW 2011/65/EU standard) 64GB: 57 TBW 128GB: 114 TBW Device Sleep mode (optional) 256GB: 228 TBW *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **Non-operating 1 2015 Apacer Technology Inc. Rev. 1.0