RoHS Recast Compliant Industrial Micro SD 3.0 microSDHC Product Specifications (Toshiba 15nm) December 16, 2015 Version 1.2 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Industrial Micro SD 3.0 AP-MSDxxGXA-1FTM FEATURES: UHS-I Bus Speed Mode Fully Compatible with SD Card Association Specifications Flash Management - Part 1, Physical Layer Specification, Ver 3.01 - Built-in advanced ECC algorithm Final - Wear-leveling - Part 2, File System Specification, Ver 3.00 - Flash bad-block management - Part 3, Security Specification, Ver 3.00 Final - SMART Capacity Range Temperature Range - 8, 16, 32, 64 GB - Operating temperature: Commercial: -25C ~ 85C Performance* Extended: -40C ~ 85C - Sustained Read: Up to 44 MB/sec - Storage temperature: -40C ~ 85C - Sustained Write: Up to 36 MB/sec Operating Voltage: 2.7V ~ 3.6V SD-Protocol Compatible Power Consumption* Supports SD SPI Mode - Operating: 135 mA Backward Compatible with 2.0 - Standby: 250 A NAND Flash Type: MLC Physical Dimensions : 15mm (L) x 11mm (W) x 1mm (H) Write Protect RoHS Recast Compliant *Performance values presented here are typical and may vary depending on settings and platforms. 1 2015 Apacer Technology, Inc. Rev. 1.2