RoHS Compliant PCI Express Disk Module M.2 PT42 Product Specifications (Toshiba 15nm) April 19, 2016 Version 1.1 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com PCI-Express Disk Module APPxxxG3FB-ATM Features: Standard PCI Express Bus Interface Temperature Range PCI Express Specification Rev.2.0* Operating: 0C to 70C PCI Express Card Electromechanical Rev. Storage: -40C to 100C 2.0 Supply Voltage PCI Express Gen2 x 2 3.3 V 5% Supports Separate Reference Clock Independent SSC Power Consumption** Active mode: 780 mA Capacity Idle mode: 415 mA 8, 16, 32, 64, 128 GB Form Factor Performance** M.2 2242-D2-B-M Sequential Read Speed up to 530 MB/s Dimensions: 42.00x22.00x3.70, unit: mm Sequential Write Speed up to 170 MB/s RoHS Compliant Flash Management Supports ECC up to 72 bit correction per 1K Supports NCQ (Native Command Queue) Byte data Commands Wear leveling Supports AHCI Programming Interface Flash bad-block management S.M.A.R.T. Power failure management NAND Flash: MLC *Not backward compatible. Operational instability or inefficiency will occur if this device is applied on a PCIe 1.0 socket. **Varies from capacities. The performance and power consumption values addressed here are typical and may vary from platforms. 2016 Apacer Technology Inc. 1 Rev. 1.1