RoHS Compliant PCI Express Flash Drive PT120-M280 Product Specifications October 2, 2018 Version 1.3 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Specifications Overview: PCIe Interface Temperature Range Compliant with NVMe 1.3 Operating: 0C to 70C Storage: -40C to 100C Compatible with PCIe Gen3 x2 interface Supply Voltage Capacity 3.3 V 5% Single side: 120, 240 GB Double side: 480 GB Power Consumption* Performance* Active mode: 1,010 mA Idle mode: 155 mA Interface burst read/write: 2 GB/sec Sequential read: up to 1,600 MB/sec Connector Type Sequential write: up to 1,035 MB/sec 75-pin M.2 module pinout Random read (4K): up to 170,000 IOPS Power Management Random write (4K): up to 190,000 IOPS Supports APST Flash Management Supports ASPM L1.2 Low-Density Parity-Check (LDPC) Code NAND Flash Type: 3D TLC (BiCS3) Global Wear Leveling MTBF: >1,000,000 hours Flash bad-block management Flash Translation Layer: Page Mapping Form Factor S.M.A.R.T. M.2 2280-S3-B-M: 120, 240 GB Power Failure Management M.2 2280-D5-B-M: 480 GB TRIM Dimensions: Hyper Cache Technology Single side: 80.00 x 22.00 x 2.38, unit: mm Over-Provisioning Double side: 80.00 x 22.00 x 3.88, unit: mm Net Weight: 6.80 g Security Shock & Vibration** End-to-End Data Protection Shock: 1,500 G Reliability Vibration: 15 G Thermal Sensor RoHS Compliant Thermal Management Technique Endurance (in drive writes per day : DWPD) 120 GB: 1.32 DWPD 240 GB: 1.14 DWPD 480 GB: 1.01 DWPD *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. **Non-operating 1 2018 Apacer Technology Inc.