RoHS Compliant Serial ATA Flash Drive SAFD18S4 -M Product Specifications rd March 23 , 2012 Version 1.3 Apacer Technology Inc. Apacer Technology Inc. 9/F, No. 100, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan th 4 Fl., 75 Hsin Tai Wu Rd., Sec.1, Hsichih, New Taipei City, Taiwan 221 Tel: +886-2-2696-1666 Fax: +886-2-2696-1668 Tel: +886-2-2698-2888 Fax: +886-2-2698-2889 www.apacer.com www.apacer.com Serial ATA Flash Drive APS1845xxxx-ACMX Features: Standard Serial ATA 2.6 (Gen. 2) Data integrity under power-cycling Serial ATA 2.6 (Gen. 2) No battery required for data storage SATA, 3.0 Gbps Temperature ranges ATA-compatible command set Operation: Standard: 0C to 70C (32 ~ 158F) Capacities Extended: -40 ~ +85C (-40 ~ 185F)** 8, 16, 32, 64, 128 GB Storage: -40C to 100C (-40 ~ 212F) Performance* Supply voltage Burst read/write: 300 MB/sec Sustained read: up to 155 MB/sec 5.0 V 5% Sustained write: up to 80 MB/sec Power consumption (typical)* Intelligent endurance design Active mode: 310 mA Built-in hardware ECC, enabling up to Idle mode: 86 mA 16/24 bit correction per 1K bytes Form factor Static wear-leveling scheme together JEDEC MO-297 with dynamical block allocation to Only 4mm in thickness significantly increase the lifetime of a Dimensions (54 x 39.8 x 4, unit: mm) flash device and optimize the disk performance Connector Flash bad-block management 7-pin SATA signal connector S.M.A.R.T. 15-pin SATA power connector Power Failure Management Shock & Vibration ATA Secure Erase Shock: 50g (approx.) TRIM Vibration: 15g (approx.) NAND Flash Type: MLC RoHS compliant *Varies from capacities. The values addressed here are typical and may vary depending on settings and platforms. **Only available in 16, 32, 64GB capacities. Please see Product Ordering Information for details. 1 2012 Apacer Technology Inc. Rev. 1.3