RoHS Compliant Serial ATA Flash Drive SFD18A Product Specifications October 18, 2016 Version 1.4 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Serial ATA Flash Drive APS18AXAxxxG-XXXXX Features: Compliance with SATA Revision 3.1 Temperature Range SATA 6.0 Gbps interface Operating: Backward compatible with SATA 1.5 and Standard: 0C to 70C 3.0 Gbps interfaces Extended: -40C to 85C ATA-8 command set Storage: -40C to 100C Capacity Supply Voltage 32, 64, 128, 256 GB 3.3V & 5V Performance* Power Consumption* Interface burst read/write: 600 MB/sec Active mode: 575 mA Sustained read: up to 530 MB/sec Idle mode: 95 mA Sustained write: up to 445 MB/sec Form Factor Random read (4K): up to 82,000 IOPS 1.8 inch (78.5 x 54 x 5, unit: mm) Random write (4K): up to 76,000 IOPS Connector Flash Management 7-pin SATA male connector Built-in hardware ECC 9-pin SATA power connector Static/dynamic wear leveling Flash bad-block management Shock & Vibration** S.M.A.R.T. Shock: 1,500 G Power failure management Vibration: 15 G ATA secure erase SATA Power Management Mode TRIM Device Sleep Mode (optional) NAND Flash Type: SLC RoHS Compliant *Varies from capacities. The values addressed here are typical and may vary depending on settings and platforms. **Non-operating 1 2016 Apacer Technology Inc. Rev. 1.4