RoHS Compliant Serial ATA Flash Drive SS210-18 Product Specifications (Toshiba 24nm) February 23, 2018 Version 1.0 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Features: Compliance with SATA Revision 3.1 Temperature Range SATA 6.0 Gbps interface Operating: Backward compatible with SATA 1.5 and Standard: 0C to 70C 3.0 Gbps interfaces Extended: -40C to 85C ATA-8 command set Storage: -40C to 100C Capacity Supply Voltage 32, 64, 128, 240 GB 3.3V & 5V Performance* Power Consumption* Burst read/write: 600 MB/sec 3.3V Sequential read: Up to 525 MB/sec Active mode: 750 mA Sequential write: Up to 440 MB/sec Idle mode: 105 mA Seq. read QD32: Up to 560 MB/sec 5V Seq. write QD32: Up to 440 MB/sec Active mode: 495 mA Random read (4K): Up to 82,000 IOPS Idle mode: 70 mA Random write (4K): Up to 76,000 IOPS Form Factor Flash Management 1.8 inch Built-in hardware ECC Dimensions: 78.50 x 54.00 x 5.00, unit: mm Global Wear Leveling Connector Type Flash bad-block management 7-pin SATA male connector S.M.A.R.T. 9-pin SATA power connector Power Failure Management ATA Secure Erase Shock & Vibration** TRIM Shock:1,500 G DRAM Cache for Enhanced Random Vibration: 15 G Performance Device Sleep Mode (optional) SATA Power Management Mode RoHS Compliant NAND Flash Type: SLC MTBF: >2,000,000 hours *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **Non-operating 1 2018 Apacer Technology Inc.