RoHS Compliant SATA Flash Drive SFD18SH-M Product Specifications November 13, 2015 Version 2.0 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Serial ATA Flash Drive APS18SH1xxxG-XTMX Features: Serial ATA Revision 3.1 Compliance Temperature Ranges SATA 6.0 Gbps interface Operating: Backward compatible with SATA 3.0/1.5 Standard: 0C to 70C Gbps interface Extended: -40C to 85C ATA Command set Storage: -40C to 85C Capacities Supply Voltage 8, 16, 32, 64, 128, 256 GB 5 V 5% Performance* Power Consumption (typical)* Interface burst read/write: 600 MB/sec Active mode: 392 mA Sustained read: up to 510 MB/sec Idle mode: 57 mA Sustained write: up to 190 MB/sec Form Factor Flash Management JEDEC MO-297 Built-in hardware ECC Dimensions (54.0 x 39.8 x 4.0, unit: ) Wear-leveling Flash bad block management Connector S.M.A.R.T. 7-pin SATA male connector Power Failure Management 15-pin SATA power connector TRIM RoHS Compliant NAND Flash Type: MLC Device Sleep Mode (optional) Endurance 8 GB: 7 TBW 16 GB: 14 TBW 32 GB: 28 TBW 64 GB: 57 TBW 128 GB: 114 TBW 256 GB: 228 TBW *The values presented for Performances and Power Consumption are typical and may vary depending on different configurations and platforms. 1 2015 Apacer Technology Inc. Rev. 2.0