RoHS Compliant SATA Flash Drive SFD18SH-M Product Specifications th November 25 , 2014 Version 1.4 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Serial ATA Flash Drive APS18SH1xxxx-XTMX Features: Serial ATA Revision 3.1 Compliance Temperature ranges SATA 6.0 Gbps interface Operating: Backward compatible with SATA 3.0/1.5 Standard: 0C to 70C Gbps interface Extended: -40C to 85C ATA Command set Storage: -40C to 85C Capacities Supply voltage 16, 32, 64, 128, 256 GB 5 V 5% Performance* Power consumption (typical)* Interface burst read/write: 600 MB/sec Active mode : 1,960 mW Sustained read: up to 510 MB/sec Idle mode : 285 mW Sustained write: up to 190 MB/sec Form factor JEDEC MO-297 Flash endurance design Dimensions (54.0 x 39.8 x 4.0, unit: mm) Built-in hardware ECC Connector Wear-leveling 7-pin SATA male connector Flash bad block management 15-pin SATA power connector S.M.A.R.T. Power Failure Management RoHS compliant TRIM Device Sleep mode (optional) NAND Flash Type: MLC Endurance 16GB : 27 TBW 32GB : 54 TBW 64GB : 108 TBW 128GB : 217 TBW 256GB : 434 TBW *The values presented for Performances and Power Consumption are typical and may vary depending on different configurations and platforms. 1 2014 Apacer Technology Inc. Rev. 1.4