RoHS Compliant
Serial ATA Flash Drive
SFD25A-M HighSpeed Product Specifications
August 21, 2015
Version 1.8
Apacer Technology Inc.
1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C
Tel: +886-2-2267-8000 Fax: +886-2-2267-2261
www.apacer.com
Serial ATA Flash Drive
APS25AXXxxxx-XTMXX
Features:
Compliance with SATA Revision 3.1 Temperature ranges
SATA 6.0 Gbps interface Operating:
Backward compatible with SATA 1.5 and Standard: 0C to 70C
3.0 Gbps interfaces Extended: -40C to 85C
ATA-8 command set Storage: -40C to 100C
Capacities Supply voltage
32, 64, 128, 256 GB
5.0 V 5%
Performance*
Power consumption (typical)*
Interface burst read/write: 600 MB/sec
Active mode: 680 mA
Sustained read: up to 525 MB/sec
Idle mode: 50 mA
Sustained write: up to 455 MB/sec
Form factor
Random read (4K): up to 86,000 IOPS
2.5
Random write (4K): up to 79,000 IOPS
Dimensions with 7mm enclosure:
Flash Management
100.00 x 69.85 x 6.90, unit: mm
Built-in hardware ECC
Dimensions with 9.5mm enclosure:
Static/dynamic wear leveling
100.00 x 69.84 x 9.30, unit: mm
Flash bad-block management
Connector
S.M.A.R.T.
7-pin SATA signal connector
Power Failure Management
15-pin SATA power connector
ATA Secure Erase
TRIM
Shock & Vibration**
Shock: 1500 G
NAND Flash Type: MLC
Vibration: 15 G
Endurance (in Terabytes Written: TBW)
DRAM cache for enhanced random
32GB: 68 TBW
performance
64GB: 136 TBW
128GB: 272 TBW
SATA power management modes
256 GB: 545 TBW
Device Sleep mode (optional)
RoHS compliant
Thermal sensor (optional)
*The values addressed here are typical and may vary depending on settings and platforms.
**Non-operating
1
2015 Apacer Technology Inc. Rev. 1.8