RoHS Compliant Serial ATA Flash Drive SFD25A-M HighSpeed Product Specifications March 25, 2016 Version 2.2 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Serial ATA Flash Drive APS25AXXxxxx-XXTMXX Features: Compliance with SATA Revision 3.1 Temperature Range SATA 6.0 Gbps interface Operating: Backward compatible with SATA 1.5 and Standard: 0C to 70C 3.0 Gbps interfaces Extended: -40C to 85C ATA-8 command set Storage: -40C to 100C Capacity Supply Voltage 32, 64, 128, 256 GB 5.0 V 5% Performance* Power Consumption* Interface burst read/write: 600 MB/sec Active mode: 680 mA Sustained read: up to 525 MB/sec Idle mode: 50 mA Sustained write: up to 455 MB/sec Form Factor Random read (4K): up to 86,000 IOPS 2.5 Random write (4K): up to 79,000 IOPS Dimensions with 7mm enclosure: Flash Management 100.00 x 69.85 x 6.90, unit: mm Built-in hardware ECC Dimensions with 9.5mm enclosure: Static/dynamic wear leveling 100.00 x 69.84 x 9.30, unit: mm Flash bad-block management Connector S.M.A.R.T. 7-pin SATA signal connector Power Failure Management 15-pin SATA power connector ATA Secure Erase TRIM Shock & Vibration** Shock: 1,500 G NAND Flash Type: MLC Vibration: 15 G Endurance (in Terabytes Written: TBW) DRAM Cache for Enhanced Random 32GB: 68 TBW Performance 64GB: 136 TBW 128GB: 272 TBW SATA Power Management Modes 256 GB: 545 TBW Device Sleep Mode (optional) Thermal Sensor (optional) RoHS Compliant *The values addressed here are typical and may vary depending on settings and platforms. **Non-operating 1 2016 Apacer Technology Inc. Rev. 2.2