RoHS Compliant Serial ATA Flash Drive SFD25A Product Specifications December 14, 2015 Version 1.5 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Serial ATA Flash Drive APS25AXXxxxx-XTX Features: Compliance with SATA Revision 3.1 Temperature Range Serial ATA Revision 3.1 Operating: SATA 6.0 Gbps interface Standard: 0C to 70C Backward compatible with SATA 1.5 and Extended: -40C to 85C 3.0 Gbps interfaces Storage: -40C to 100C ATA-8 command set Supply Voltage Capacity 5.0 V 5% 8, 16, 32, 64, 128, 256 GB Power Consumption* Performance* Standard: Interface burst read/write: 600 MB/sec Active mode: 275 mA Standard speed: Idle mode: 105 mA Sustained read: up to 160 MB/sec High speed: Sustained write: up to 150 MB/sec Active mode: 500 mA High speed: Idle mode: 65 mA Sustained read: up to 530 MB/sec Form Factor Sustained write: up to 445 MB/sec 2.5 Random read (4K): up to 88,000 IOPS Dimensions with 7mm enclosure: Random write (4K): up to 76,000 IOPS 100.00 x 69.85 x 6.90, unit: mm Flash Management Dimensions with 9.5mm enclosure: Built-in hardware ECC 100.00 x 69.84 x 9.30, unit: mm Static/dynamic wear leveling Connector Flash bad-block management 7-pin SATA signal connector S.M.A.R.T. 15-pin SATA power connector Power Failure Management ATA Secure Erase Shock & Vibration** TRIM Shock: 1,500 G Vibration: 15 G NAND Flash Type: SLC Device Sleep Mode (optional) SATA Power Management Modes RoHS Compliant *The values addressed here are typical and may vary depending on settings and platforms. **Non-operating 1 2015 Apacer Technology Inc. Rev. 1.5