RoHS Compliant Serial ATA Flash Drive SS210-25 Product Specifications November 7, 2017 Version 1.6 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Features: Compliance with SATA Revision 3.1 Temperature Range Serial ATA Revision 3.1 Operating: SATA 6.0 Gbps interface Standard: 0C to 70C Backward compatible with SATA 1.5 and Extended: -40C to 85C 3.0 Gbps interfaces Storage: -40C to 100C ATA-8 command set Supply Voltage Capacity 5.0 V 5% 8, 16, 32, 64, 128, 240 GB Power Consumption* Performance* Active mode: 500 mA Burst read/write: 600 MB/sec Idle mode: 95 mA Sequential read: Up to 530 MB/sec Sequential write: Up to 445 MB/sec Connector Type Random read (4K): Up to 88,000 IOPS 7-pin SATA signal connector Random write (4K): Up to 76,000 IOPS 15-pin SATA power connector Flash Management Form Factor Built-in hardware ECC 2.5 Global Wear Leveling Dimensions with 7mm enclosure: 100.00 x 69.85 x 6.90, unit: mm Flash bad-block management Dimensions with 9.5mm enclosure: S.M.A.R.T. 100.00 x 69.84 x 9.30, unit: mm Power Failure Management Shock & Vibration** ATA Secure Erase TRIM Shock:1,500 G Vibration: 15 G SATA Power Management Mode Device Sleep NAND Flash Type: SLC RoHS Compliant MTBF: >2,000,000 hours *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. **Non-operating 1 2017 Apacer Technology Inc.