RoHS Compliant Serial ATA Flash Drive SM210-25 Product Specifications November 7, 2017 Version 1.9 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Features: Compliance with SATA Revision 3.1 Temperature Range SATA 6.0 Gbps interface Operating: Backward compatible with SATA 1.5 and Standard: 0C to 70C 3.0 Gbps interfaces Extended: -40C to 85C ATA-8 command set Storage: -40C to 100C Capacity Supply Voltage 16, 32, 64, 128, 256, 512 GB 5.0 V 5% Performance* Power Consumption* Burst read/write: 600 MB/sec Active mode: 680 mA Sequential read: Up to 510 MB/sec Idle mode: 75 mA Sequential write: Up to 470 MB/sec Connector Type Random read (4K): Up to 83,000 IOPS 7-pin SATA signal connector Random write (4K): Up to 79,000 IOPS 15-pin SATA power connector Flash Management Form Factor Built-in hardware ECC 2.5 Global Wear Leveling Dimensions with 7mm enclosure: Flash bad-block management 100.00 x 69.85 x 6.90, unit: mm S.M.A.R.T. Dimensions with 9.5mm enclosure: Power Failure Management 100.00 x 69.84 x 9.30, unit: mm ATA Secure Erase Shock & Vibration** TRIM Shock:1,500 G NAND Flash Type: MLC Vibration: 15 G MTBF: >1,000,000 hours DRAM Cache for Enhanced Random Performance Endurance (in Terabytes Written: TBW) SATA Power Management Modes 16 GB: 35 TBW 32 GB: 71 TBW Thermal Sensor 64 GB: 142 TBW Device Sleep 128 GB: 285 TBW 256 GB: 571 TBW RoHS Compliant 512 GB: 1,142 TBW *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. **Non-operating 1 2017 Apacer Technology Inc.