RoHS Compliant SATA Flash Drive SFD25H-M Product Specifications February 9, 2015 Version 1.4 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Serial ATA Flash Drive APS25HPXxxxx-3TMX Features: Serial ATA Revision 3.1 Compliance Temperature ranges SATA 6.0 Gbps interface Operating: Backward compatible with SATA 3.0/1.5 Standard: 0C to 70C Gbps interface Extended: -40C to 85C ATA Command set Storage: -40C to 85C Capacities Supply voltage 512 GB, 1 TB 5 V 5% Performance* Power consumption (typical)* Burst read/write: 600 MB/sec Active mode: 810 mA 5 V Sustained read: up to 510 MB/sec Idle mode: 85 mA 5 V Sustained write: up to 460 MB/sec Form factor Random Read (4K): 42,000 IOPS 2.5 inch Random Write (4K): 26,000 IOPS Dimensions for 7mm housing: 100.10 x 69.85 x 7.00, unit: Flash endurance design Dimensions for 9.5mm housing: Built-in hardware ECC, enabling up to 72 100.00 x 69.85 x 9.50, unit: bit correction per 1K Bytes Wear-leveling Connector Flash bad block management 7-pin SATA male connector S.M.A.R.T. 15-pin SATA power connector Power Failure Management TRIM DDR3 cache for enhanced random performance NAND Flash Type: MLC RoHS compliant MTBF (hours): >1,000,000 Endurance 512GB: 1061 TBW 1TB: 2073 TBW *The values presented for Performances and Power Consumption are typical and may vary depending on different configurations and platforms. 1 2015 Apacer Technology Inc. Rev. 1.4