RoHS Compliant Serial ATA Flash Drive SM210-297 High-Speed Product Specifications December 11, 2017 Version 1.2 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Features: Compliance with SATA Revision 3.1 Temperature Range SATA 6.0 Gbps interface Operating: Backward compatible with SATA 1.5 and Standard: 0C to 70C 3.0 Gbps interfaces Extended: -40C to 85C ATA-8 command set Storage: -40C to 100C Capacity Supply Voltage 32, 64, 128, 256, 512 GB 5.0 V 5% Performance* Power Consumption* Burst read/write: 600 MB/sec Active mode: 825 mA Sequential read: up to 520 MB/sec Idle mode: 80 mA Sequential write: up to 470 MB/sec Connector Type Seq. read QD32: Up to 545 MB/sec 7-pin SATA signal connector Seq. write QD32: Up to 490 MB/sec 15-pin SATA power connector Random read (4K): up to 83,000 IOPS Form Factor Random write (4K): up to 78,000 IOPS JEDEC MO-297 Flash Management Dimensions (54.0 x 39.8 x 4.0, unit: mm) Built-in hardware ECC Shock & Vibration** Global Wear Leveling Flash bad-block management Shock:1,500 G S.M.A.R.T. Vibration: 15 G Power Failure Management DRAM Cache for Enhanced Random ATA Secure Erase Performance TRIM Thermal Sensor SATA Power Management Device Sleep NAND Flash Type: MLC RoHS Compliant MTBF: >1,000,000 hours Endurance (in Terabytes Written: TBW) 32 GB: 60 TBW 64 GB: 133 TBW 128 GB: 279 TBW 256 GB: 604 TBW 512 GB: 586 TBW *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. Power consumption results of 128/256GB were based on experimental estimations. **Non-operating 1 2017 Apacer Technology Inc.