RoHS Compliant Serial ATA Flash Drive SS210-297 High-Speed Product Specifications October 25, 2017 Version 1.1 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Features: Compliance with SATA Revision 3.1 Temperature Range SATA 6.0 Gbps interface Operating: Backward compatible with SATA 1.5 and Standard: 0C to 70C 3.0 Gbps interfaces Extended: -40C to 85C ATA-8 command set Storage: -40C to 100C Capacity Supply Voltage 4, 8, 16, 32, 64, 128 GB 5.0 V 5% Performance* Power Consumption* Burst read/write: 600 MB/sec Active mode: 470 mA Sequential read: up to 525 MB/sec Idle mode: 85 mA Sequential write: up to 435 MB/sec Seq. read QD32: Up to 555 MB/sec Connector Type Seq. write QD32: Up to 435 MB/sec 7-pin SATA signal connector Random read (4K): up to 86,000 IOPS 15-pin SATA power connector Random write (4K): up to 76,000 IOPS Form Factor Flash Management JEDEC MO-297 Built-in hardware ECC Dimensions (54.0 x 39.8 x 4.0, unit: mm) Global Wear Leveling Shock & Vibration** Flash bad-block management Shock:1,500 G S.M.A.R.T. Vibration: 15 G Power Failure Management DRAM Cache for Enhanced Random ATA Secure Erase Performance TRIM Thermal Sensor SATA Power Management Device Sleep NAND Flash Type: SLC RoHS Compliant MTBF: >2,000,000 hours *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. Power consumption results of 128/256GB were based on experimental estimations. **Non-operating 1 2017 Apacer Technology Inc.