RoHS Recast Compliant SATA-Disk Module 5A SDM5A 7P/180D Low Profile Product Specifications January 18, 2016 Version 1.0 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com SATA-Disk Module 5A APSDMxxxGX2AX-CTXX Features: Standard Serial ATA 3.1 Revision Temperature Range SATA 6.0 Gbps interface Operating: ATA-8 command set Standard: 0C to 70C Backward compatible with SATA 1.5/3.0 Extended: -40C to 85C Gbps Storage: -40C to 100C Capacity Supply Voltage Standard Type: 1, 2, 4, 8, 16 GB 5.0 V 5% High-Speed Type: 8, 16, 32 GB Power Consumption* (available in cable-less type only) Standard Type: Performance* Active mode: 165 mA Burst read/write: 600 MB/sec Idle mode: 65 mA Standard Type: High-Speed Type: Sustained read: up to 34 MB/sec Active mode: 260 mA Sustained write: up to 55 MB/sec Idle mode: 60 mA High-Speed Type: Connector Type Sustained read: up to 435 MB/sec 7-pin SATA signal connector Sustained write: up to 215 MB/sec Form Factor Flash Management SATA Disk Module: 7-pin/180 degree Built-in hardware ECC Dimensions (without housing): Static/dynamic wear-leveling 30.00x27.80x8.20, unit: mm** Flash bad-block management 30.00x27.80x7.40, unit: mm*** S.M.A.R.T. Dimensions (with housing): Power failure management 32.50x29.40x8.53, unit: mm ATA secure erase Shock & Vibration**** NAND Flash Type: SLC Shock:1,500 G MTBF: >2,000,000 hours Vibration: 15 G RoHS Recast Compliant Complies with 2011/65/EU standard *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **Standard type ***High-speed type ****Non-operating 1 2016 Apacer Technology Inc. Rev. 1.0