RoHS Recast Compliant SATA-Disk Module 5A SDM5A-M 7P/180D Low Profile Product Specifications January 6, 2015 Version 1.0 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com SATA-Disk Module 5A APSDMxxxxX2XN-ATMX Features: Standard Serial ATA 3.1 Revision Temperature ranges Serial ATA 3.1 Revision compliance Operating: 0C to 70C SATA 6.0 Gbps interface Storage: -40C to 100C ATA-8 command set Supply voltage Backward compatible with SATA 1.5/3.0 5.0 V 5% Gbps Power consumption (typical)* Capacities Standard Type: Standard Type: 4, 8, 16, 32 GB Active mode: 190 mA High-speed Type: 16, 32, 64 GB (in Idle mode: 55 mA cable-less type only) High-speed Type: Performance* Active mode: 280 mA Burst read/write: 600 MB/sec Idle mode: 55 mA Standard Type: Connector type Sustained read: up to 125 MB/sec 7-pin SATA signal connector Sustained write: up to 65 MB/sec Power segment options: 2 metal pins on High-speed Type: each side of SATA connector or power Sustained read: up to 445 MB/sec cable connector Sustained write: up to 135 MB/sec Form factor Flash Management SATA Disk Module: 7-pin/180 degree Built-in hardware ECC, enabling up to Dimensions (without housing): 40-bit correction per 1K bytes Static/dynamic wear-leveling 30.00x27.80x8.20, unit: ** Flash bad-block management 30.00x27.80x7.40, unit: *** S.M.A.R.T. Dimensions (with housing): Power Failure Management 32.50x29.40x8.53, unit: ATA Secure Erase TRIM Shock & Vibration**** NAND Flash Type: MLC Shock:1500 G Vibration: 15 G MTBF: >1,000,000 hours RoHS Recast compliant Complies with 2011/65/EU standard *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **Standard type ***High-speed type ****Non-operating 1 2015 Apacer Technology Inc. Rev. 1.0