RoHS Compliant Serial ATA Flash Drive mSATA H1-M Product Specifications July 13, 2015 Version 1.8 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com mSATA Flash Drive APSDMxxxxM1HN-XTMX Features: Compliance with SATA Revision 3.1 Temperature ranges SATA 6.0 Gbps interface Operating: Backward compatible with SATA 1.5/3.0 Standard: 0C to 70C Gbps interfaces Extended: -40C to 85C ATA command set Storage: -40C to 85C Capacities Supply voltage 8, 16, 32, 64, 128, 256 GB 3.3 V 5% Performance* Power consumption (typical)* Interface burst read/write: 600 MB/sec Active mode: 485 mA Sustained read: up to 520 MB/sec Idle mode: 100 mA Sustained write: up to 185 MB/sec Form factor JEDEC MO-300 Flash Management Dimensions (50.80 x 29.85 x 1.00, unit: ) Built-in hardware ECC Wear leveling Connector Bad block management 52-pin mSATA signal connector S.M.A.R.T. RoHS compliant Power Failure Management TRIM Device Sleep (optional) NAND Flash Type: MLC Endurance 8 GB: 7 TBW 16GB: 14 TBW 32GB: 28 TBW 64GB: 57 TBW 128GB: 114 TBW 256 GB: 228 TBW *Varies from capacities. The values addressed here are typical and may vary depending on host system settings. 1 2015 Apacer Technology Inc. Rev. 1.8