RoHS Recast Compliant SATA-Disk Module 5A-M SDM5A-M 22P/180D Product Specifications (Toshiba 15nm) January 7, 2016 Version 1.0 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com SATA-Disk Module 5A-M APSDMxxxG42AN-CTM1X Features: Standard Serial ATA Interface Temperature Range Serial ATA Revision 3.1 Operating: SATA 6.0 Gbps interface Standard: 0C to 70C ATA-8 command set Extended: -40C to 85C Backward compatible with SATA 1.5/3.0 Storage: -40C to 100C Gbps Supply Voltage Capacities 5.0 V 5% 8, 16, 32, 64 GB Power Consumption* Performance* Active mode: 205 mA Burst read/write: 600 MB/sec Idle mode: 80 mA Sustained read: up to 245 MB/sec Connector Type Sustained write: up to 75 MB/sec 7-pin SATA signal connector Flash Management 15-pin SATA power connector Built-in hardware ECC Form Factor Static/dynamic wear-leveling SATA Disk Module Flash bad-block management S.M.A.R.T. Shock & Vibration** Power failure management Shock:1,500 G ATA secure erase Vibration: 15 G TRIM RoHS Recast Compliant NAND Flash Type: MLC Complies with 2011/65/EU standard MTBF: >1,000,000 hours *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **Non-operating 1 2016 Apacer Technology Inc. Rev. 1.0