RoHS Recast Compliant SATA-Disk Module 5A SDM5A 7P/180D Low Profile 2 Product Specifications January 16, 2018 Version 1.4 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Features: Standard Serial ATA 3.1 Revision Temperature Range SATA 6.0 Gbps Operating: ATA-8 command set Standard: 0C to 70C Backward compatible with SATA 1.5/3.0 Extended: -40C to 85C Gbps Storage: -40C to 100C Capacity Supply Voltage 8, 16, 32 GB 5.0 V 5% Performance* Power Consumption* Interface burst read/write: 600 MB/sec Active mode: 260 mA Sequential read: Up to 435 MB/sec Idle mode: 60 mA Sequential write: Up to 215 MB/sec Connector Type Flash Management 7-pin SATA signal connector Built-in hardware ECC 2-pin power connector for external power Global Wear Leveling cable Flash bad-block management Form Factor S.M.A.R.T. SATA Disk Module: 7-pin/180 degree Power Failure Management Dimensions: 33.00 x 29.30 x 1.00**, ATA Secure Erase unit: mm NAND Flash Type: SLC Shock & Vibration*** MTBF: >2,000,000 hours Shock:1,500 G Vibration: 15 G Write Protect Switch (optional) RoHS Recast Compliant Complies with 2011/65/EU Standard *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **1.00mm indicates the thickness of the module only. ***Non-operating 1 2018 Apacer Technology Inc.