RoHS Recast Compliant SATA-Disk Module 5A SDM5A-M 7P/180D Low Profile 2 Product Specifications January 19, 2015 Version 1.1 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com SATA-Disk Module 5A APSDM0xxGL2XN-ATMG Features: Standard Serial ATA 3.1 Revision Temperature ranges SATA 6.0 Gbps interface Operating: 0C to 70C ATA-8 command set Storage: -40C to 100C Backward compatible with SATA 1.5/3.0 Supply voltage Gbps 5.0 V 5% Capacities Power consumption (typical)* 16, 32, 64 GB Active mode: 280 mA Performance* Idle mode: 55 mA Burst read/write: 600 MB/sec Connector type Sustained read: up to 445 MB/sec 7-pin SATA signal connector Sustained write: up to 135 MB/sec Power segment options: 2 metal pins on Flash Management each side of SATA connector or power Built-in hardware ECC, enabling up to cable connector 40-bit correction per 1K bytes Form factor Static/dynamic wear-leveling SATA Disk Module: 7-pin/180 degree Flash bad-block management Dimensions: 33.00 x 29.30 x 1.00 ** S.M.A.R.T. Power Failure Management Shock & Vibration*** ATA Secure Erase Shock:1500 G TRIM Vibration: 15 G NAND Flash Type: MLC MTBF: >1,000,000 hours RoHS Recast compliant Complies with 2011/65/EU standard *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **1.00mm indicates the thickness of the module only. ***Non-operating 1 2015 Apacer Technology Inc. Rev. 1.1