RoHS Compliant Serial ATA Flash Drive mSATA A1-M Product Specifications (Toshiba 15nm) March 28, 2016 Version 1.2 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Serial ATA Flash Drive APSDMxxxGMXXX-XXTMX Features: Compliance with SATA Revision 3.1 Temperature Range SATA 6.0 Gbps interface Operating: Backward compatible with SATA 1.5 and Standard: 0C to 70C 3.0 Gbps interfaces Extended: -40C to 85C ATA-8 command set Storage: -40C to 100C Capacity Supply Voltage 8, 16, 32, 64, 128, 256 GB 3.3 V 5% Performance* Power Consumption* Burst read/write: 600 MB/sec Active mode: 710 mA Sustained read: up to 505 MB/sec Idle mode: 95 mA Sustained write: up to 345 MB/sec Form Factor Random read 4K: up to 83,000 IOPS JEDEC MO-300 Random write 4K: up to 79,000 IOPS Shock & Vibration** Flash Management Shock: 1,500 G Built-in hardware ECC Vibration: 15 G Static/dynamic wear leveling Flash bad-block management DRAM Cache for Enhanced Random S.M.A.R.T. Performance Power failure management SATA Power Management Modes ATA secure erase TRIM Device Sleep Mode (optional) NAND Flash Type: MLC Write Protect Switch (optional) MTBF: >1,000,000 hours Thermal Sensor (optional) Endurance (in Terabytes Written: RoHS Compliant TBW)(Est.) 8GB: 17 TBW 16GB: 34 TBW 32GB: 68 TBW 64GB: 136 TBW 128GB: 272 TBW 256 GB: 545 TBW *Varies from capacities. The values addressed here are typical and may vary depending on settings and platforms. **Non-operating 1 2016 Apacer Technology Inc. Rev. 1.2