RoHS Recast Compliant SATA-Disk Module 5A SDM5A 7P/90D MP2 Product Specifications March 29, 2016 Version 1.0 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com SATA-Disk Module 5A APSDMxxxGQ2XN-CXX Features: Standard Serial ATA 3.1 Revision Temperature Range Serial ATA 3.1 Revision compliance Operating: SATA 6.0 Gbps interface Standard: 0C to 70C ATA-8 command set Extended: -40C to 85C Backward compatible with SATA 1.5/3.0 Storage: -40C to 100C Gbps Supply Voltage Capacity 5.0 V 5% 2, 4, 8, 16, 32 GB Power Consumption* Performance* Active mode: 215 mA Interface burst read/write: 600 MB/sec Idle mode: 85 mA Sustained read: up to 65 MB/sec Connector Type Sustained write: up to 105 MB/sec 7-pin SATA signal connector Flash Management Form Factor Built-in hardware ECC SATA Disk Module: 7-pin/90 degree Middle Static/dynamic wear-leveling Profile 2 Flash bad-block management Dimensions: 52.25x24.00x15.20, unit: mm S.M.A.R.T. Power failure management Shock & Vibration** ATA secure erase Shock:1,500 G TRIM Vibration: 15 G NAND Flash Type: SLC Write Protect Switch (optional) MTBF: >2,000,000 hours RoHS Recast Compliant Complies with 2011/65/EU standard *Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations or platform settings. The term idle refers to the standby state of the device. **Non-operating 1 2016 Apacer Technology Inc. Rev. 1.0