RoHS Recast Compliant
SATA-Disk Module 5A
SDM5A-M 7P/90D Low Profile 2 Product Specifications
February 6, 2015
Version 1.0
Apacer Technology Inc.
1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C
Tel: +886-2-2267-8000 Fax: +886-2-2267-2261
www.apacer.com
SATA-Disk Module 5A
APSDM0xxGH2XN-ATMG
Features:
Standard Serial ATA 3.1 Revision Temperature ranges
SATA 6.0 Gbps interface Operating: 0C to 70C
ATA-8 command set Storage: -40C to 100C
Backward compatible with SATA 1.5/3.0
Supply voltage
Gbps
5.0 V 5%
Capacities
Power consumption (typical)*
16, 32, 64 GB
Active mode: 280 mA
Performance*
Idle mode: 55 mA
Burst read/write: 600 MB/sec
Connector type
Sustained read: up to 445 MB/sec
7-pin SATA signal connector
Sustained write: up to 135 MB/sec
Power segment options: 2 metal pins on
Flash Management
each side of SATA connector or power
Built-in hardware ECC, enabling up to
cable connector
40-bit correction per 1K bytes
Form factor
Static/dynamic wear-leveling
SATA Disk Module: 7-pin/180 degree
Flash bad-block management
Dimensions: 33.00 x 29.30 x 1.00 **
S.M.A.R.T.
Power Failure Management
Shock & Vibration***
ATA Secure Erase
Shock:1500 G
TRIM
Vibration: 15 G
NAND Flash Type: MLC
MTBF: >1,000,000 hours
RoHS Recast compliant
Complies with 2011/65/EU standard
*Varies from capacities. The values for performances and power consumptions presented are typical and may vary depending on flash configurations
or platform settings. The term idle refers to the standby state of the device.
**1.00mm indicates the thickness of the module only.
***Non-operating
1
2015 Apacer Technology Inc. Rev. 1.0