RoHS Compliant mSATA Flash Drive mSATA mini H1-M Product Specifications th September 24 , 2014 Version 1.1 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com mSATA Flash Drive APSDMxxxxN1HN-XTMX Features: Compliance with SATA Revision 3.0 Temperature ranges Serial ATA Revision 3.0 Operating: SATA 6.0 Gbps interface Standard: 0C to 70C Backward compatible with SATA 1.5/3.0 Extended: -40C to +85C Gbps interfaces Storage: -40C to +85C ATA command set Supply voltage Capacities 3.3 V 5% 8, 16, 32, 64, 128 GB Power consumption (typical)* Performance* Active mode: 475 mA Interface burst read/write: 600 MB/sec Idle mode: 85 mA Sustained read: up to 520 MB/sec Form factor Sustained write: up to 180 MB/sec mSATA mini, JEDEC MO-300B Dimensions (29.85 x 26.80 x 1.00**, unit: mm) Flash Management Connector Built-in hardware ECC 52-pin mSATA signal connector Wear leveling Bad block management RoHS compliant S.M.A.R.T. Device Sleep (optional) *** Power Failure Management TRIM NAND Flash Type: MLC *Varies from capacities. The values addressed here are typical and may vary depending on host system settings. **Only the height of the PCB ***Not available in 64GB and 128GB models 1 2014 Apacer Technology Inc. Rev. 1.1