RoHS Compliant mSATA Flash Drive mSATA mini H1-M Product Specifications July 8, 2015 Version 1.4 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com mSATA Flash Drive APSDMxxxxN1HN-XTMX Features: Compliance with SATA Revision 3.1 Temperature ranges SATA 6.0 Gbps interface Operating: Backward compatible with SATA 1.5/3.0 Standard: 0C to 70C Gbps interfaces Extended: -40C to +85C ATA command set Storage: -40C to +85C Capacities Supply voltage 8, 16, 32, 64, 128 GB 3.3 V 5% Performance* Power consumption (typical)* Interface burst read/write: 600 MB/sec Active mode: 475 mA Sustained read: up to 520 MB/sec Idle mode: 85 mA Sustained write: up to 180 MB/sec Form factor mSATA mini, JEDEC MO-300B Flash Management Dimensions (29.85 x 26.80 x 1.00**, unit: mm) Built-in hardware ECC Connector Wear leveling 52-pin mSATA signal connector Bad block management S.M.A.R.T. RoHS compliant Power Failure Management Device Sleep (optional) *** TRIM NAND Flash Type: MLC Endurance 8GB: 13 TBW 16GB: 27 TBW 32GB: 54 TBW 64GB: 108 TBW 128GB: 217 TBW *Varies from capacities. The values addressed here are typical and may vary depending on host system settings. **Only the height of the PCB ***Not available in 64GB and 128GB models 1 2015 Apacer Technology Inc. Rev. 1.4