RoHS Compliant Serial ATA Flash Drive mSATA A1-M HighSpeed Product Specifications Aug 5, 2015 Version 2.1 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Serial ATA Flash Drive APSDMxxxxMXXD-XXTMX Features: Compliance with SATA Revision 3.1 Temperature ranges SATA 6.0 Gbps interface Operating: Backward compatible with SATA 1.5 and Standard: 0C to 70C 3.0 Gbps interfaces Extended: -40C to 85C ATA-8 command set Storage: -40C to 100C Capacities Supply voltage 32, 64, 128, 256 GB 3.3 V 5% Performance* Power consumption (typical)* Burst read/write: 600 MB/sec Active mode: 930 mA Sustained read: up to 530 MB/sec Idle mode: 80 mA Sustained write: up to 460 MB/sec Form factor Random read 4K: up to 85,000 IOPS JEDEC MO-300 Random write 4K: up to 79,000 IOPS Shock & Vibration** Flash Management Shock: 1500 G Built-in hardware ECC Vibration: 15 G Static/dynamic wear leveling Flash bad-block management DRAM cache for enhanced random S.M.A.R.T. performance Power Failure Management SATA power management modes ATA Secure Erase TRIM Device Sleep mode (optional) NAND Flash Type: MLC Write Protect Switch (optional) Endurance (in Terabytes Written: TBW) RoHS compliant 32GB: 68 TBW Thermal sensor (optional) 64GB: 136 TBW 128GB: 272 TBW 256 GB: 545 TBW *Varies from capacities. The values addressed here are typical and may vary depending on settings and platforms. **Non-operating 1 2015 Apacer Technology Inc. Rev. 2.1