RoHS Compliant Serial ATA Flash Drive mSATA A1 Product Specifications October 20, 2015 Version 1.7 Apacer Technology Inc. 1F, No.32, Zhongcheng Rd., Tucheng Dist., New Taipei City, Taiwan, R.O.C Tel: +886-2-2267-8000 Fax: +886-2-2267-2261 www.apacer.com Serial ATA Flash Drive APSDMxxxxMXXN-XXTX Features: Compliance with SATA Revision 3.1 Temperature Ranges Serial ATA Revision 3.1 specifications Operating: SATA 6.0 Gbps interface Standard: 0C to 70C Backward compatible with SATA 1.5 and Extended: -40C to 85C 3.0 Gbps interfaces Storage: -40C to 100C ATA-8 command set Supply Voltage Capacities 3.3 V 5% 2, 4, 8, 16, 32, 64, 128 GB Power Consumption (typical)* Performance* Standard type: Interface burst read/write: 600 MB/sec Active mode: 410 mA Standard type: Idle mode: 195 mA Sustained read: up to 160 MB/sec High-speed Sustained write: up to 155 MB/sec Active mode: 890 mA High-speed type: Idle mode: 160 mA Sustained read: up to 530 MB/sec Form Factor Sustained write: up to 450 MB/sec JEDEC MO-300 Random read 4K: up to 82,000 IOPS Random write 4K: up to 77,000 IOPS Shock & Vibration** Shock: 1,500 G Flash Management Vibration: 15 G Built-in hardware ECC, enabling up to 40 bit correction per 1K bytes SATA Power Management Modes Static/dynamic wear leveling Device Sleep Mode (optional) Flash bad-block management S.M.A.R.T. Write Protect Switch (optional) Power Failure Management RoHS Compliant ATA Secure Erase TRIM NAND Flash Type: SLC *Varies from capacities. The values addressed here are typical and may vary depending on settings and platforms. **Non-operating 1 2015 Apacer Technology Inc. Rev. 1.7