10400 series Professional pushbutton switches threaded bushing 10 mm DISTINCTIVE FEATURES Threaded bushing dia. 10 (.393) CECC approved Available with black finish ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : 3 A 24 VDC Minimum load : 100 A 10 mV Initial contact resistance : 10 m max. Insulation resistance : 1,000 M min. at 5 00VDC Dielectric strength : 1,000 Veff. 50 Hz min. between terminals of the same pole 2,000 Veff. 50 Hz min. between terminals and frame 2,000 Veff. 50 Hz min. between terminals of adjacent poles Electrical life : 50,000 cycles GENERAL SPECIFICATIONS Torque : 1.50 Nm (1.106 Ft.lb) max. applied to nut Operating temperature : -40 C to +85 C (-40 F to +185 F) Max. panel thickness : 3.5 mm (.138) MATERIALS Case : diallylphthalate (DAP) Actuator : brass, chrome plated Bushing : brass, nickel plated Housing : brass, nickel plated Contacts : - silver - gold plated silver Terminal seal : epoxy APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. The company reserves the right to change specifications without notice. 1 SW-10400-1808 PANEL SWITCHES10400 series Professional pushbutton switches threaded bushing 10 mm AGENCY APPROVAL CECC 96401-001 Availability : consult factory for details of approved models. Marking : to order switches marked CECC, add CECC to model number. PANEL CUT-OUT 10.20 (.401 DIA) 2.20 (.086) TERMINALS 1.20 (.047) 2.50 (.098) ELECTRICAL FUNCTIONS KEYWAY 2131 32 Single pole Double pole ABOUT THIS SERIES Complete part numbers are shown on the following page. Sealing boots are available to protect the switches against dust and water. See Sealing boots section of website. Mounting accessories : standard hardware supplied with all models : 1 knurled nut, 1 hex nut, 1 locking ring and 1 lockwasher. It is presented in the Hardware section of website. 2 PANEL SWITCHES 1.70 (.066) 5.00 (.196) 6.20 (.244)