12145CT13V/1X778 Apem

12000 series Professional toggle switches threaded bushing 11.9 mm DISTINCTIVE FEATURES CECC approved - conforms to MIL specifications Robust switches for high specification environments Toggle action on 2-position models for a smooth mechanical operation Several front panel sealing options Several locking lever options ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load: - silver contacts (A-AD2-X780): 4 A 30 VDC - gold contacts (D): 100 mA 30 VDC Minimum load: AD2-X780-D contacts: 10 mA 50 mV, 10 A 5 V min. Peak currents: refer toSpecial option. Initial contact resistance: 10 m max. Insulation resistance: 1,000 M min. at 500 VDC Dielectric strength: 1,000 Vrms 50 Hz min. between terminals 2,000 Vrms 50 Hz min. between poles and between terminals and frame Contact bounce: 2 ms max. Electrical life at full load: Number of cycles Contacts Max. current/voltage rating 2 positions 3 positions A 4 A 30 VDC 50,000 50,000 AD2 4 A 30 VDC 20,000 20,000 X780 (Gold plating: 100 mA 30 VDC max.) D 100 mA 30 VDC 80,000 50,000 Low level or mechanical life 150,000 100,000 GENERAL SPECIFICATIONS Torque: 1.50 Nm (1.10 Ft.lb) max. applied between the 2 nuts Standard panel thickness: 4.5 mm (.177) max. Operating temperature: -40 C to +85 C (-40 F to +185 F) The company reserves the right to change specifications without notice. 1 SW-12000-1801 PANEL SWITCHES12000 series Professional toggle switches threaded bushing 11.9 mm MATERIALS TERMINALS Case: diallylphthalate (DAP) Actuator: brass, chrome plated Bushing: brass, nickel plated 1.00 1.20 (.039) (.047) Housing: brass, nickel plated 2.50 (.098) Contacts A: silver Solder lugs Straight PC AD2: gold plated silver (2 microns gold) X780: solid rivet - gold plated - silver/nickel alloy D: solid gold rivet ELECTRICAL FUNCTIONS X910: silver/nickel alloy (for peak currents, seeSpecial option) KEYWAY Terminal seal: epoxy APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. Note: AD2 and X780 contacts can be used for high level applications. In this case, the gold layer is considered only as a protection against oxidation during storage. 1 2 3 1 2 3 Function 6 Other functions AGENCY APPROVALS CECC 96201-005 PANEL CUT-OUT CECC 96201-008 Designed to MIL specifications 12.50 3.50 12.00 12.00 (.492 DIA) (.137 DIA) (.472 DIA) (.472 DIA) Availability: consult factory for details of approved models. Marking: to order switches marked CECC, complete appropriate box of ordering format. 9.60 5.10 5.10 (.377) (.200) (.200) Standard 12.50 12.00 12.00 3.50 (.492 DIA) (.472 DIA) (.472 DIA) (.137 DIA) 9.60 5.10 5.10 (.377) (.200) (.200) With K sealing option 12.50 12.00 12.00 3.50 (.492 DIA) (.472 DIA) (.472 DIA) (.137 DIA) 9.60 5.10 5.10 (.377) (.200) (.200) With X408 sealing option 2 PANEL SWITCHES 1.70 (.066) 1.70 (.066) 5.00 (.196) 1.70 (.066) 9.50 (.374) 1.70 (.066)