1621 Apem

1600-1700 series Toggle switches metal lever DISTINCTIVE FEATURES Reduced behind-panel space requirement (models with side terminals) Optional insulated lever Wiping contacts ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : 4 A 30 VDC Initial contact resistance : 10 m max. Insulation resistance : 1,000 M min. at 500 VDC Dielectric strength : 2,000 Vrms 50 Hz min. between terminals, 2,000 Vrms 50 Hz min. between poles and between terminals and lever Electrical life : 10,000 cycles at full load GENERAL SPECIFICATIONS Torque : 1.50 Nm (1.10 Ft.lb) max. applied to nut Panel thickness : 5 mm (.196) max. Operating temperature : -20 C to +55 C (-4 F to +131 F) MATERIALS Case : phenolic resin Actuator : 1600 models : brass nickel plated 1700 models : polyamide Bushing : brass, nickel plated Contacts : phosphor bronze and brass, silver plated. APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. The company reserves the right to change specifications without notice. 1 SW-1600-1700-1901 PANEL SWITCHES1600-1700 series Toggle switches metal lever PANEL CUT-OUT 12.20 (.48DIA) ELECTRICAL FUNCTIONS KEYWAY TERMINALS 9.50 2.50 7.50 (.374) (.098) (.295) 2.10 (.082DIA) 3.00x0.5 SI 1.50 (.118x0.5 IS) (.059DIA) 4.00 4.00 2.95 (.157) (.157DIA) (.116) Solder lug Screw Quick-connect ABOUT THIS SERIES Sealing boots are available on models 1600 to protect the switches against dust and water. See Sealing boots section of website. Mounting accessories : standard hardware supplied with all models : 1 hex nut U166 and 1 knurled nut U411. It is presented in the Hardware section of website. 2 PANEL SWITCHES 6.00 (.236) 6.35 (.25) 6.35x0.80 (.25x.031)