Controlmec 1Z For navigation unit illumination option DISTINCTIVE FEATURES Round 29.5 mm h=12.0 mm One piece navigational cap Single components or a complete module SWITCH SPECIFICATIONS : see Multimec 5 series. 4X5E+5G TH +1Z 29,5 SW3 SW2 SW1 SW4 SW5 CONTROLMEC 1Z MODULE 1 pcs. 5GTH935 (+LEDs) 40 4 pcs. 5ETH935 6,9 0,1 32 3,2 (x4) PCB 1,5 Hole in front plate 30,3 0,1 SW3 J1 SW2 SW1 SW4 SW5 J2 25,0 29,5 10 PCB LAYOUT CONNECTOR INFORMATION 10,16 Connectors on the module are Molex picoflex series 90816-0320 for switches and 90816-0316 for J1 additional LEDs. We recommend using: 0,9 25,0 Cable socket: 90327-0320 for switches aJ2nd 90327- 0316 for additonal LEDs. The company reserves the right to change specifications without notice. All tolerance if not otherwise specified 0.2 mm. 1 MEC-CONTROLMEC1Z-1906 20 3,5 33 46,7 7,2 PANEL SWITCHESPCB SWITCHES 25,0 25,0 7,62 5,1 2,0 0,2 6,9 0,1 Controlmec 1Z For navigation unit illumination option BUILD YOUR PART NUMBER SINGLE PARTS 5G + 4x5E SWITCH MOUNTING LED* CAP COLOR LEGEND TYPE* illuminated through- pad blue non-sealed 02 1Z TH9 Blank hole printed frosted 16 green white 22 surface hard paint SH9 mount laser LMH non illuminated high intensity 29 marked green ACTUATION FORCE grey 03 yellow 42 2.0N 20 white 06 LEGEND* white 61 edge 3.5N 35 black 09 red 82 136 6.5N 65 green/yellow 2242 center red/green 8222 OK 118 red/yellow 8242 123 MODULE 95 C MODULE CAP ACTUATION FORCE LED* LEGEND TYPE* LEGEND* edge controlmec pad C 3.5N blue 35 02 Blank printed 136 TYPE green 6.5N 22 65 hard paint center 1Z laser LMH A high intensity nonilluminated 29 marked OK 118 green 1Z illuminated B yellow 123 42 COLOR white 61 frosted white 16 red 82 black 09 *optional NOTICE : please note that not all combinations of above numbers are available. Refer to www.apem.com for further information. MATERIALS Cap : - solid color : ABS UL94HB - illuminated : polycarbonate UL94HB 2 PCB SWITCHES