2600 series Power rocker switches DISTINCTIVE FEATURES Three rocker shapes : plain, V-shaped or concave Various rocker colors Frame with protection guard on 2600LP models Illuminated or non-illuminated UL, CSA, VDE and NF (EN 61058-1) approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load and approved ratings : see table below. Initial contact resistance : 10 m max. Insulation resistance : 1,000 M min. at 500 VDC Dielectric strength : 2,500 Vrms 50 Hz min. between terminals 3,000 Vrms 50 Hz min. between terminals and metal panel Electrical life : 10,000 cycles at full load DIRECT APPROVED RATINGS CURRENT Functions CSA UL VDE NF (double pole) (double pole) 24 12 VDC VDC CSA 22-2 UL 1054 EN 61058-1 EN 61058-1 1/6 HP 125 VAC 1/6 HP 125 VAC 10(4) A 250 ON - OFF 16 A 125 VAC 16 A 125 VAC VAC - 10 A 15 A ON - ON 16 A 250 VAC 16 A 250 VAC T 85/55 1/3 HP 250 VAC 1/3 HP 250 VAC 10 A 125 VAC 10 A 125 VAC L I option L I option ON - OFF - ON 10 A 250 VAC 10 A 250 VAC 8 A 10 A 10(4) A 250 VAC 10(4) A 250 VAC 1/6 HP 125/250 VAC 1/6 HP 125/250 VAC ON - ON - ON - - - - 5 A 8 A 10 A 125 VAC L I option L I option OTHERS 10 A 250 VAC - 8 A 10 A 10(4) A 250 VAC 10(4) A 250 VAC 1/6 HP 250 VAC GENERAL SPECIFICATIONS Panel thickness : 0.8 mm to 4 mm (.031 to .157) Operating temperature : - silver contacts (A) : -20 C to +85 C (-4 F to +185 F) - silver plated contacts (C) : -10 C to +55 C (+14 F to +131 F) The company reserves the right to change specifications without notice. 1 SW-2600-1805 PANEL SWITCHESPANEL SWITCHES2600 series Power rocker switches MATERIALS ELECTRICAL FUNCTIONS Case : melamine/polyester Frame : polyamide Actuator : polyamide Contacts : A : silver C : copper, silver plated APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. AGENCY APPROVALS PANEL CUT-OUT EN 61058-1 EN 61058-1 Availability : consult factory for details of approved models. Marking : approved models are standard marked. TERMINALS 3.00x0.50 SI 3.10 (.118DIAx0.50 IS) (.122DIA) 6.35x0.80 (.25x.031) 6.35 0.80 (.031) (.25) Screw Solder lug / quick-connect &+ Z Z Normalized quick-connect 2 PANEL SWITCHES 4.50 (.177)