30-0001 Apem

A01 series Pushbutton switches & indicators Distinctive features and specifications A01 AX1607USR1 Panel Sealed to IP65 Single pole to four pole changeover Custom engraving or film legends options Push on tab terminals 6A 250VAC ELECTRICAL SPECIFICATIONS PANEL CUT OUT Current/Voltage Rating : 10mA 5VAC min, 6A 250VAC, 6Amp 12VDC Round & Square bezel Initial Contact Resistance : 10m max at 1A 4VDC operators only Insulation Resistance : 50M min 16.00 0.00/+0.30 Dielectric Strength : 750V between open contacts, 5KV live to accessible .000/+.011 (.629 DIA ) Electrical Life : 50,000 cycles min Contact Gap : >1mm (0.039) Insulation : Class 2 Lamp Life : LED, 60,000 hours to 75% relative luminosity filament, approx. 5000 hours 1.50 neon, approx. 10,000 hours (.059) MECHANICAL SPECIFICATIONS Rectangular bezel operators only Mechanical Life : (operator) Momentary, 1 million cycles, maintained 100,000 cycles 16.00 0.00/+0.30 Lamp : Midget grove T1 filament, neon or LED .000/+.011 (.629 DIA ) Terminals : Solder/quick connect 2.8mm (0.110) 2.00 (.078 DIA) AGENCY APPROVALS GENERAL SPECIFICATIONS 10.50 Operating Temperature : -20C to +55C (.413) Solder Heat Resistance : 350C for 5 seconds Max panel thickness 8mm (0.314) Sealing : Panel sealed to IP65, rear of panel IP40 CIRCUIT MATERIALS Screens : PC Reflector Assembly : PC Operator : PBT Nut : ABS Camtrack Momentary : PPE Camtrack Maintained : PPSU Switch Block 1 & 2 Pole : PBT Switch Block 3 & 4 Pole : PEI Contacts : Gold plated silver Dimensions : first dimensions are in mm while inches are shown in brackets. Refer to the following pages for further information. Mounting accessories : standard hardware 1 nut and 1 sealing washer. The company reserves the right to change specifications without notice. APEM www.apem.com 1 7.25 (.285)A01 series Pushbutton switches & indicators Panel cut-out 16 (0.755) Pushbutton Indicator APEM www.apem.com 2