4FSH982 Apem

Illumec 4F Illuminated switches slip-on cap retention system integrated chip-LEDs DISTINCTIVE FEATURES 10 x 10 mm h=10.4 mm Illumination with integrated chip-LEDs Single or bi-color illumination Momentary NO Simple slip-on cap retention system ENVIRONMENTAL SPECIFICATIONS Switch sealing : IP67 according to IEC 60529 Working and storage temperature : -30C/+85C Soldering : - through-hole : IEC 68-2-20 8 - surface mount : JEDEC J-STD-020C ELECTRICAL SPECIFICATIONS Recommended load : - Gold contacts : 0.5-50mA 24VDC - Silver contacts : 0.5-50mA 24VDC Contact resistance : <30m - typically 10m Insulation resistance : >10M MATERIALS Contact bounce : <2mS - typically 0.5mS Housing : PPS UL94V0 Actuator : PPS UL94V0 Sealing : Silicone rubber Contacts spring : Stainless steel MECHANICAL SPECIFICATIONS Silver : +3Ag Gold : +1Au Standard actuation force : 3.5N Fixed contacts : Max. actuation force : 100N for 10 sec Silver : SnCu + 2NI + 3Ag Travel : 1 mm Gold : SnCu + 2NI + 1Au Lifetime : >10,000,000 cycles Terminals : SnCu + 2NI + 3Sn100 The company reserves the right to change specifications without notice. All tolerance if not otherwise specified 0.2mm. 369 For full series information: www.apem.com PANEL SWITCHESPCB SWITCHES Illumec 4F Illuminated switches slip-on cap retention system integrated chip-LEDs 4FSH9XX Top TVoiepw View TopT Voipe wView SMD NO Single or bi-color LEDs 4FTH9XX TopT oVpie Vwiew TopTo Vpi eVwiew TH NO Single or bi-color LEDs All tolerances unless otherwise noted : 0.2 mm PCB LAYOUT & CIRCUIT DIAGRAM SINGLE LED BI-COLOR - 2 LEDS TH SMD TH SMD 370 PCB SWITCHES