4R18-2S1E-55-126 Apem

4000 series Industrial resistive joysticks The 4000 Series is a range of robust, industrial quality potentiometer joysticks for internal and external applications. All 4000 Series share the same, all metal mechanism to provide the finest performance and service life over a wide range of temperatures and loads. All 4000 Series employ high quality plas- tic film potentiometers, yielding a service life of many millions of cycles. KEY FEATURES Two standard mounting options IP65 above panel Low current drain Inherently immune to RFI Variety of potentiometer options Optional centre-detect micro- Robust switching All metal mechanism Available in two body variants www.apem.com4000 series Industrial resistive joysticks OPTION SELECTION SERIES AXES -2- -1- BEZEL MODIFIER 4 4000 1 One 0 None 00 None 2 Two 3 Square 06 4 Microswitches 3 Three 5 Circular 113 2 Microswitches POTS SPRING HANDLE BOOT BODY 1 10K 340 F Friction Hold E Conical 1 Internal R Closed 5 5K 340 H Strong Q Skirted 5 Standard P Open 8 5K 55 S Standard R Third Axis 9 5K 55 +CT W Weak * for more handles see next pages Note: 1 Only available on 4P types CABLE SPECIFICATIONS 14/0.12 - Fourteen strands of 0.12mm diameter tinned annealed copper wire PVC insulated, to a nominal OD of 1mm Red : +Vcc for X & Y Axes B l a c k : 0V for X & Y Axes Blue : X Axis Wiper Y e l l o w : Y Axis Wiper Green : Center Tap 7/0.127 - Seven strands of 0.127mm diameter tinned copper wire ETFE insulated, to a nominal OD of 0.7mm Orange : Pushbutton Red : + Vcc for Z Axis Blue : 0V for Z Axis Green : Z Axis Wiper All 4000 Series are supplied with150mm of twisted cable harness, with tinned ends. Connectors fitted upon request. If supplied, microswitches are rated for up to 5A and are not wired, allowing the user flexibility of connection. TECHNICAL SPECIFICATION Life Cycles : >5 Million Operations L e v er Travel : +/-27.50 Degrees : : Glass Filled ABS or Steel Lever Material Stainless Steel B o dy Material : See guide Boot Material : Neoprene or Santoprene Handle Material : HE30 Alloy Pivot Blocks Other Materials : Brass Temperature Range : -20C to +55C R esistance Tolerance :+/-20% : +/-2% Linearity Output Smoothness : 0.1% max :1000MO hms, 500VD C Power Rating : 1W at 70C - Derate to 0W at 125C Insulation Resistance Preferred Load : >100K P o tentiometer Alignment : To Center of Track (+/-1%) : 110 Grams : IP65 (subject to handle) Weight Above Panel Seal NOTES: - All values are nominal - All specifications shown are based on a standard configuration and are provided for guidance only. - Please refer to Apem for assistance on how to achieve the best performance from your chosen configuration. Note: The company reserves the right to change specifications without notice. www.apem.com