A018301 Apem

A01 series Keylock & selector switches Distinctive features and specifications A018 AX1607US Panel Sealed to IP65 Single pole to four pole changeover Custom engraving & overmould key Push on tab terminals 6A 250VAC ELECTRICAL SPECIFICATIONS PANEL CUT OUT Round & Square bezel Current/Voltage Rating : 10mA 5VAC min, 6A 250VAC, 6A 12VDC operators only Initial Contact Resistance : 10m max at 1Amp 4VDC Insulation Resistance : 50M min 16.00 0.00/+0.30 .000/+.011 (.629 DIA ) Dielectric Strength : 750V between open contacts, 5KV live to accessible Electrical Life : 50,000 cycles min Contact Gap : >1mm (0.039) Insulation : Class 2 1.50 (.059) MECHANICAL SPECIFICATIONS Rectangular bezel operators only Mechanical Life (operator) : Momentary, 1 million cycles, maintained 100,000 cycles Lamp : Midget grove T1 filament, neon or LED 16.00 0.00/+0.30 .000/+.011 (.629 DIA ) Terminals : Solder/quick connect 2.8mm (0.110) 2.00 (.078 DIA) AGENCY APPROVALS GENERAL SPECIFICATIONS 10.50 Operating Temperature : -20C to +55C (.413) Solder Heat Resistance : 350C for 5 seconds Max panel thickness 8mm (0.314) Sealing : Panel sealed to IP65, rear of panel IP40 MATERIALS Key : Nickel plated steel Key Barrel : Chrome plated alloy Operator : PBT Nut : ABS Camtrack Momentary : PPE Camtrack Maintained : PPSU Switch Block 1 & 2 pole : PBT Switch Block 3 & 4 pole : PEI Contacts : Gold plated silver Dimensions : first dimensions are in mm while inches are shown in brackets. Refer to the following pages for further information. Mounting accessories : standard hardware 1 nut and 1 sealing washer. The company reserves the right to change specifications without notice. APEM www.apem.com 1 7.25 (.285)A01 series Keylock & selector switches Panel cut-out 16 (0.755) Keylock Selector APEM www.apem.com 2