AS36S0100 Apem

AS series Snap-in rocker switches DISTINCTIVE FEATURES Double insulation Epoxy sealed terminals UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts (code 1) and gold plated silver contacts (code 2) : 4 A 30 VDC - gold plated brass contacts (code 0) : 0.4 VA 20 V AC or DC Initial contact resistance : 10 m max. Insulation resistance : 10,000 M min. Dielectric strength : 1,000 Vrms 50 Hz min. between terminals 4,000 Vrms 50 Hz min. between terminals and metal panel Electrical life : 50,000 cycles GENERAL SPECIFICATIONS Panel thickness : 1 (.039) to 3 mm (.118) max. Operating temperature : -40 C to +85 C (-40 F to +185 F) MATERIALS Case : PES Actuator : polyamide Contacts 0 : brass, gold plated 1 : silver 2 : silver, gold plated 5 : special contact, lower rating Minimum quantity : consult factory. Terminal seal : epoxy APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. The company reserves the right to change specifications without notice. 1 SW-AS-2011 PANEL SWITCHESPANEL SWITCHESAS series Snap-in rocker switches PANEL CUT-OUT AGENCY APPROVALS 2 A 250 VAC 4 A 125 VAC Availability : consult factory for details or approved models. Marking : to order switches marked with above approvals, complete last box of ordering format. ELECTRICAL FUNCTIONS 1 2 3 TERMINALS 1.10 1.10 (.043) 1.80 (.043) (.070) Straight PC Solder lug 2 PANEL SWITCHES 5.40 (.212) 4.10 (.161) 3.70 (.145) 1.90 (.074)