AV09820KMZBK Apem

AV series Security pushbutton switches suitable for 250 VAC approved according to EN 61058-1 DISTINCTIVE FEATURES Mains switches approved to EN61058-1 16 (.629), 19 (.748) and 22 mm (.866) Latching Three terminal types ENVIRONMENTAL SPECIFICATIONS Optional front panel sealing : IP65 according to IEC 60529 Operating temperature : -30 C to +70 C(-22 F to +158 F) ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : 1 A 250 VAC Initial contact resistance : 50 m max. Insulation resistance : 1,000 M min. at 500 VDC Dielectric strength : 2,000 Vrms 50 Hz min. between terminals 500 Vrms 50 Hz between terminals and frame Electrical life : 10,000 cycles at 1 A 250 VAC GENERAL SPECIFICATIONS Torque : 5 Nm min. - 14 Nm max. applied to nut Panel thickness : 16 : 1 (.039) to 6 mm (.236) max. 19 and 22 : 1 (.039) to 9 mm (.354) max. Low level or mechanical life : 200,000 cycles Hand soldering : 300 C (572 F), 4 sec. max. MATERIALS Case : PA4-6, UL94-V0 Contacts : silver (A) Bushing & actuator : see following pages APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. The company reserves the right to change specifications without notice. 1 SW-AV250V-1711 PANEL SWITCHESAV series Security pushbutton switches suitable for 250 VAC approved according to EN 61058-1 AGENCY APPROVAL EN61058-1 1A 250 VAC All models marked ELECTRICAL FUNCTIONS OFF ON PANEL MOUNTING CAVDTF1SFCT Panel cut-out : 16.2 mm (.755) 19.2 mm (.755) or 22.2 mm (.874) 2 PANEL SWITCHES