AV5V022000074BK Apem

AV series Security pushbutton switches 30 mm illuminated momentary NC/NO DISTINCTIVE FEATURES Large actuator With illuminated ring Momentary NC/NO Solder lug, flying lead or cable terminals Marking available on request ENVIRONMENTAL SPECIFICATIONS Optional front panel sealing : IP67 according to IEC 60529 Robustness : IK06 according to EN 62262 (1 joule) Operating temperature : -30 C to +85 C (-22 F to +185 F) ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : 1 A 30 VDC LED voltage : 12 VDC, 24 VDC or 48 VDC (If not supplied by APEM, a resistor must be series-connected by the user)** Initial contact resistance : 100 m max. Insulation resistance : 10 M min. at 500 VDC Dielectric strength : 500 Vrms 50 Hz min. between terminals 1,000 Vrms 50 Hz min. between terminals and frame Electrical life : 250,000 cycles at full load **Resistor value = supply voltage - LED forward voltage LED forward current GENERAL SPECIFICATIONS Travel : 2.5 mm 0.3 mm (.003) Operating force : 5 N 2 N Torque : 10 Nm max. Panel thickness : 1 (.039) to 6 mm (.236) max. Low level or mechanical life : 1,000,000 cycles Hand soldering : 350 C (662 F), 5 seconds max. The company reserves the right to change specifications without notice. 1 SW-AV30NCNO-1709 PANEL SWITCHESAV series Security pushbutton switches 30 mm illuminated momentary NC/NO MATERIALS Case : polyamide, glass filled Contacts : silver Bushing : see following pages Actuator : see following pages Elastomeric membrane : silicone LED ELECTRICAL FUNCTIONS CAV3-9FCT NC/NO ECHELLE 1 MOUNTING Panel cut-out : 30.2 mm (1.189) Min. pitch for matrix mounting : 44 mm x 44 mm (1.732x1.732) 2 PANEL SWITCHES