AV9712F1020840K Apem

AV series Security pushbutton switches 19 mm (.748) New With illuminated ring - momentary (NC/NO) ORDER FORMAT Options : see next page. AV 9 2 Bushing dia. 19 mm LED resistor Contacts Terminals SERIES 0 No resistor supplied 2 Silver 2 Solder / LED colour 1 12VDC resistor quick-connect 0 : no LED - 1 : blue - V : green 2 24VDC resistor F Flying leads CAV3-9FCT 5 : yellow - 6 : red - 7 : white - 9 : amber 4 48VDC resistor C Cable NC/NO ECHELLE 1 SPECIFICATIONS MATERIALS Travel : 2 mm 0,3 mm (.003) Case : polyamide, glass filled Max. current/voltage rating with resistive load : 1A 30VDC Contacts : silver B LED voltage : 12VDC, 24VDC or 48VDC Bushing : see next page (If not supplied by APEM, a resistor must be series-connected by the user)** Actuator : see next page Initial contact resistance : 100 m max. Elastomeric membrane : silicone Insulation resistance : 10 M min. at 500VDC LED Dielectric strength : 500 Vrms 50 Hz min. between terminals 1.000 Vrms 50 Hz min. between terminals and frame Electrical life : 250.000 cycles at full load CUT-OUT Operating force : 5N 2N Panel cut-out : 19,2 mm (.755) Torque : 5 Nm min.- 14 Nm max. applied to nut Min. pitch for matrix mounting : Panel thickness : 1 (.039) to 6 mm (.236) max. 30 mm x 30 mm (1.181x1.181) Mechanical life : 1.000.000 cycles Operating temperature : -20C to +55C To order a product, select a basic Hand soldering : 350C, 5 seconds max. Packaging unit : flying lead/cable models : 1 piece - other models : 40 pieces model below and add the desired LED colour and voltage. Then select the supply voltage - LED forward voltage ** Resistor value = LED forward current desired options on next page. Hex nut 22 (.866) across flats Flat actuator - solder lug terminals 2.20 3.00 (.086) (.118) NC NO Illuminated (select LED colour above) * AV9022 + - Non-illuminated AV90022 NO NC 22.00 11.60 12.10 8.30 (.866) (.456) (.476) (.326) * No LED resistor supplied on this model. Hex nut 22 (.866) across flats CAV9DT-1 Flat actuator - flying lead terminals ECHELLE 1 2.20 3.00 15.00 19.00x1.00 SI (.118) (.086) (.590DIA) (.748DIAx1.00 IS) Illuminated (select LED colour & resistor above) AV92F Non-illuminated AV9002F 11.60 12.10 200 12.00 (.456) (.476) (7.874) (.472DIA) CAV9DT-2 APEM www.apem.com B-139 ECHELLE 1 22.00 (.866DIA) 22.00 (.866DIA) 2.80x0.50 (.110x.019) 19.00x1.00 SI (.748DIAx1.00 IS)AV series Security pushbutton switches 19 mm (.748) New With illuminated ring - momentary (NC/NO) Hex nut 22 (.866) across flats Flat actuator - cable terminals 2.20 3.00 19.00x1.00 SI (.118) (.086) (.748DIAx1.00 IS) Illuminated (select colour & resistor) AV92C Non-illuminated AV9002C 11.60 12.10 200 (.456) (.476) (7.874) B Flying lead Flying lead/ Ring Bushing / After selecting basic model No., CAV9DT-3 protection cable length colour plunger mat. Sealing fill in last 5 boxes ECHELLE 1 with desired options. BASIC MODEL FLYING LEAD PROTECTION 0 No protection and/or no flying leads 1 Heat-shrink sleeves 2 Tube + epoxy FLYING LEAD/CABLE LENGTH 000 No flying leads / no cable 020 Length 20 cm (standard) XXX Length in centimeters RING COLOURS BUSHING/PLUNGER MATERIALS CODE COLOUR CODE COLOUR CODE BUSHING ACTUATOR 1 Blue 6 Red 00 Brass, nickel plated Brass, nickel plated 2 Black * 7 Opal white (std) 40 Stainless steel 303 Stainless steel 303 3 Green 8 Translucent 4A Stainless steel 304 Stainless steel 304 4 Grey * 9 Orange 4B Stainless steel 316 Stainless steel 316 5 Yellow Other : on request. * non-illuminated only SEALING Blank No sealing 2 1 internal membrane CAV3ET ECHELLE 1 external gasket K Front panel sealing (IP67) B-140 www.apem.com APEM 22.00 (.866DIA)