AV9SLD247V002K Apem

AV series Tactile security pushbutton switches with overmolded actuator 19 or 22 mm DISTINCTIVE FEATURES Tactile feedback Illuminated or non-illuminated Momentary (NO) Overmolded marking available ENVIRONMENTAL SPECIFICATIONS Front panel sealing : IP67 or IP69K according to IEC 60529 Operating temperature : -30 C to +70 C (-22 F to +158 F) ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : 50 mA 24 VDC Initial contact resistance : 100 m max. Insulation resistance : 1.000 M min. at 500 VDC Dielectric strength : 500 Vrms 50 Hz min. between terminals 2,000 Vrms 50 Hz min. between terminals and frame Electrical life : 1,000,000 cycles at full load LED COMPONENT SPECIFICATIONS LED color Forward current Typ. forward voltage Max. forward voltage Blue 20 mA 3.3 V 3.8 V Green 20 mA 4 V 4.5 V Yellow 20 mA 2 V 2.5 V Red 20 mA 1.95 V 2.5 V White 20 mA 3.3 V 4 V Amber 20 mA 2.3 V 2.8 V Red / green 20 mA 1.85 V / 2.2 V 2.5 V A resistor must be series-connected by the user Resistor value = supply voltage - LED forward voltage LED forward current The company reserves the right to change specifications without notice. 1 SW-AV1922OVERM-2012 PANEL SWITCHESAV series Tactile security pushbutton switches with overmolded actuator 19 or 22 mm GENERAL SPECIFICATIONS Travel : 0.7 mm (.027) 0.1 mm (.003) Operating force : 7 N 2N - Sealing option K will increase the operating force. Torque : 5 Nm min.- 14 Nm max. applied to nut Panel thickness : 1 (.039) to 6 mm (.236) max. Hand soldering : 270 C (518 F), 3 sec. max. MATERIALS Case : PA46 UL94-V0 Terminals : brass, gold plated Contacts : gold plated dome Bushing : see following pages Actuator : stainless steel, with thermoplastic overmolding LED APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. ELECTRICAL FUNCTIONS Function 3 (NO) MOUNTING Panel cut-out : 19.2 mm (.755), or 22.2 mm (.874) Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) 2 PANEL SWITCHES