CG111A0 Apem

19-Serie CG-A 08-Serie IP-A 18/12/12 15:41 Page120 CG series Capacitive switches for underlay applications New Distinctive features And your panel becomes active Like the CP series, CG series switches are activated by the touch of a finger. But they are designed for mounting under a non-conductive front face (glass or polycarbonate*) and are activated through the front face, transforming the inert fascia into an active interface. Low profile is an asset for this type of mounting. 50 million cycles No moving mechanical parts to wear out. B2 Advantages of under-panel mounting - Robustness - Sealing - Easy to clean flat surface - Easy panel marking Custom disk colours and marking Marking flexibility based on digital printing. * For other non conductive materials, consult APEM. Customisable adhesive disk Electronic circuit with LED Connector ABS case Mounting of a CG switch Note : the panel surface should be degreased prior to mounting. B2-120 www.apem.com APEM 19-Serie CG-A 08-Serie IP-A 21/11/12 16:39 Page121 CG series Capacitive switches for underlay applications New Specifications Activated by the touch of a finger Even with surgeon gloves 50 million cycles Auto-calibration function Ensures the sensor adapts to changing external environments Mounting under max. 6 mm glass or 4 mm polycarbonate panels B2 ENVIRONMENTAL SPECIFICATIONS MATERIALS Triggered by flowing water Case : ABS Temperature range : -40C to +70C Sealing : epoxy Adhesive and connector resistant to vibrations Wiring for mating connector Harwin M30-1100400 ELECTRICAL AND GENERAL SPECIFICATIONS Pin 1 : output Supply voltage : 5 to 24VDC max. Pin 2 : GND Supply current : 15mA max. (12V) Pin 3 : +LED Max. current/voltage rating : 200mA 24VDC Pin 4 : +VCC Life expectancy : 50 million cycles Switch resistance ON : 1 Ohm max. Mating harness (connector + wires) Power consumption : 10mA max. mode OFF available : see Accessories at the Output type : NPN end of the series. Wiring diagrams Illuminated 1 LED This switch should not be used Non-illuminated Output indicator Independent in safety applications. VCC VCC Output +LED VCC Output Output OFF-ON OFF - MOM GND GND GND APEM www.apem.com B2-121