ES1S41653 Apem

03-Serie ES-A 01-Series A01 A1-A 22/11/12 11:50 Page25 ES series Heavy-duty emergency stop New Distinctive features and specifications 2 and 3-pole configurations Rugged version : 100.000 cycle mechanical life Locked/unlocked status indicator Lower behind-panel depth Sealed to IP65, IP67 and IP69K Complies with EN 60947-5-1 ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS Electrical function : push-pull ON-ON Panel thickness : 6 mm (.236) max. Current/voltage rating : 1A 24VDC DC-14 Low level or mechanical life : Electrical life : 6.050 cycles 100.000 cycles Contact resistance : 10 m max. Travel to lock : 2,20 mm 0,3 mm Insulation resistance : 1.000 M min. at 500VDC Total travel : 4,20 mm 0,3 mm Dielectric stength : 1.000 Vrms 50 Hz min. between terminals Torque : 5 Nm min. - 14 Nm max. 2.000 Vrms 50 Hz min. between poles and between terminals and frame applied to nut Operating force : 2 pole models : Push : 30N 7N pull : 25N 5N ENVIRONMENTAL SPECIFICATIONS 3 pole models : Push : 45N 7N Sealing : IP65, IP67 and IP69K according to IEC 60529 and DIN 40050 pull : 25N 5N Salt spray : 96 hours according to IEC 68-2-11 Vibrations : 10-500 Hz - 10 g according to IEC 68-2-6 Shock resistance : 50 g according to IEC 68-2-27 MATERIALS Robustness (axial) : IK10 Operating temperature : -40C to +85C Case : diallylphthalate (DAP) According to EN 60947-5-1 Actuator : aluminium, red anodised Bushing : aluminium, yellow anodised PANEL CUT-OUT Contacts : silver, gold plated Terminal seal : epoxy O-ring Hole 2 1 G Note : the hole in the bushing is designed for insertion of a 2 mm metal rod helping to fasten the switch on the panel. 2 pole 3 pole APEM www.apem.com G-25 22.20 (.874 DIA) 6.00 Max. (.236MAX.) 28.20 1.110 DIA)03-Serie ES-A 01-Series A01 A1-A 22/11/12 11:50 Page26 ES series Heavy-duty emergency stop New Overview ES SERIES Electrical functions No of poles Actuator colour Status indicator 1 2 NC (double pole only) 4 Double pole 6 Red anodised 3 Green 2 1 NO + 1NC (double 5 Three pole Other : on request Other : on request. pole only) 3 1 NO + 2NC (three pole only) Terminals Actuator diameter Bushing colour Options P Straight PC 1 34,5 mm 5 Yellow Blank None S Solder lug (1.358) anodised 001 PUSH PULL marking Other markings : on request G Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Mounting accessories : Standard hardware supplied : 1 hex nut 25 (.984) or 32 (1.260) across flats and 1 O-ring Packaging unit : 10 pieces G-26 www.apem.com APEM