FDAP1F1482F23 Apem

FD series Double icon illuminated pushbuttons bushing 24 or 26 mm momentary or latching DISTINCTIVE FEATURES Double icon actuator Snap-in and threaded bushing models Large but lightweight Sealed to IP69K (threaded bushing version) ENVIRONMENTAL SPECIFICATIONS Front panel sealing : - Threaded bushing version : IP69K according to DIN 40050-9 - Snap-in version : IP54 according to IEC 60529 with panel gasket and 2 mm panel thickness Operating temperature : -40 C to +75 C (40 F to +167 F) ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts (code 2) : 4 A 12 VDC - gold plated contacts (code 4) : 200 mA 12 VDC Initial contact resistance : 50 m max. Insulation resistance : 1 G min. at 500 VDC Dielectric strength : 1,000 Vrms 50 Hz min. Electrical life at full load : - Momentary models : 1 million cycles (gold plated contacts) 400,000 cycles (silver contacts) - Latching models : 200,000 cycles GENERAL SPECIFICATIONS Panel thickness : - Snap-in version : 1.5 (.059) to 2 mm (.078) with panel gasket 2 (.078) to 2.5 mm (.885) without panel gasket - Threaded bushing version :1(.039) to 18 mm (.708) max. Total travel : 2.5 mm 0.5 mm Typical operating force : 8 N 2 N Low level or mechanical life : - Momentary models : 1 million cycles - Latching models : 200,000 cycles Torque : 3 Nm max. applied to nut The company reserves the right to change specifications without notice. 1 SW-FD-1808 PANEL SWITCHESPANEL SWITCHES26.00 (1.024DIA) 24.20 (.953DIA) FD series Double icon illuminated pushbuttons bushing 24 or 26 mm momentary or latching MATERIALS Case : PA46 Actuator : PA12 Bushing/ bezel : PA66 Contacts : silver (code 2) or silver, gold plated (code 4) APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. PANEL CUT-OUT 11.30 11.50 (.445) (.453) CFDDEC1 WIRING DIAGRAM FICHIER: CFDDEC-P3 + POLE 2 LED FLAT ECHELLE: 0.625 le 28/01/15 - LED POLE 1 CFP24W-A FICHIER: CFP24W ECHELLE: 0.625 indice A le 25/09/14 2 PANEL SWITCHES