X-On Electronics has gained recognition as a prominent supplier of FNRCM4FSS2N2X09XXXX10 Rocker Switches across the USA, India, Europe, Australia, and various other global locations. FNRCM4FSS2N2X09XXXX10 Rocker Switches are a product manufactured by Apem. We provide cost-effective solutions for Rocker Switches, ensuring timely deliveries around the world.
We are delighted to provide the FNRCM4FSS2N2X09XXXX10 from our Rocker Switches category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the FNRCM4FSS2N2X09XXXX10 and other electronic components in the Rocker Switches category and beyond.
FNR series Sealed rocker switches DISTINCTIVE FEATURES Ideal for front / neutral / reverse selection Easy to install Excellent front panel sealing Backlit logos ENVIRONMENTAL SPECIFICATIONS Operating temperature : -40 C to +85 C (-40 F to +185 F) Panel sealing IP69K according to DIN 40050-9 ELECTRICAL SPECIFICATIONS Maximum voltage rating with resistive load: 24 VDC Current rating with resistive load: 0.03 to 1 A Initial contact resistance: <100 mohms Insulation resistance: >10 Gohms at 500 VDC Dielectric strength: 1000 Vrms 50 Hz min. Electrical life: 1.000.000 cycles at 100 mA 100.000 cycles at 1 A LED COMPONENT SPECIFICATIONS LED color Forward current Typ. forward voltage Max. forward voltage Blue 20 mA 3.3 V 4 V Green 20 mA 2.1 V 2.5 V Red 20 mA 1.9 V 2.5 V Yellow 20 mA 2 V 2.5 V White 20 mA 3.3 V 4 V Red/green 20 mA Red: 1.9 V / green: 2.1 V 2.5 V A resistor must be series-connected by the user. Resistor value = supply voltage - LED forward voltage LED forward current The company reserves the right to change specifications without notice. 1 SW-FNR-0820 PANEL SWITCHESFNR series Sealed rocker switches GENERAL SPECIFICATIONS WIRING DIAGRAM Total travel: 15. WIRING DIAGRAM Typical operating force at center: 5 N 1 Mechanical life: 1.000.000 cycles MATERIALS Wire colors Contacts : Gold alloy (F & C output) 10 Case : PBT Brown 9 Orange Without resistor Actuator : PA6-6 8 White 7 Black Overmoulding: Polyamide 6 Blue 5 Yellow APEM products may be recycled at end-of-life for the re-claiming of valuable metal 4 components. Red 3 Green 2 Purple 1 Grey With resistor PANEL CUT-OUT POSITION CONNECTOR FOR C OUTPUT Illuminated : Molex 510651000 Non-illuminated : Molex 510650600 ELECTRICAL FUNCTIONS AND CONNECTIONS In the tables below, terminal connections as viewed from bottom of switch. Only the contact area is represented. x = w/o terminal o = with terminal = momentary 2 POSITIONS 3 POSITIONS MOM-ON-MOM 3 POSITIONS ON-ON-ON 2 PANEL SWITCHES