ILP3FAD2 Apem

IL series Sealed pushbutton switches for thick panels long bushing 12 mm momentary DISTINCTIVE FEATURES Momentary pushbuttons for thick panels Illuminated or non-illuminated Tactile feedback Flat round actuator for optional marking Sealed to IP67 (standard models only) ENVIRONMENTAL SPECIFICATIONS Front panel sealing according to IEC 60529 : IP67 (standard models) IP54 (options X1242 and 234) Shock resistance : 100 g according to IEC 512-4, test 6c Vibration resistance : 10-500 Hz - 10 g according to IEC 512-4, test 6d Salt spray : IEC 512-6, test 11f Operating temperature : -40 C to +85 C (-40 F to +185 F) ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : 2 A 24 VDC, 200,000 cycles Initial contact resistance : 50 m max. Insulation resistance : 1 G min. at 500 VDC Dielectric strength : 1,000 Vrms LED COMPONENT SPECIFICATIONS LED color Forward current Typ. forward voltage Max. forward voltage Super red (L0S) 20 mA 2.1 V 2.3 V Yellow (L0Y) 20 mA 2.1 V 2.3 V Green (L0G) 20 mA 2.1 V 2.3 V Blue (L0B) 20 mA 3.2 V 3.8 V White (L0W) 20 mA 3.35 V 4.25 V Red/Green (LSG) 20 mA Red: 1.95 V / Green: 2.1 V 2.5 V Yellow/green (LYG) 20 mA Yellow: 2 V / green: 2.1 V 2.5 V A resistor must be series-connected by the user. Resistor value = supply voltage - LED forward voltage LED forward current The company reserves the right to change specifications without notice. 1 SW-IL-1903 PANEL SWITCHESIL series Sealed pushbutton switches for thick panels long bushing 12 mm momentary GENERAL SPECIFICATIONS TERMINALS Panel thickness : 1.50 mm (.059) min. 10 mm (.393) max. Total travel : 1.7 mm (.067) 0.3 mm Typical operating force : 4 N 2 N Low level or mechanical life : 1,000,000 cycles 1.00 1.20 (.039) (.047) 2.80 (.110) Torque (applied to nut) : Straight P 1 Nm max. with metal nut U166 1.5 Nm max. with plastic nut U4248 Soldering : 300 C (572 F) max. for 3 seconds CIPCOSP CIPCOSZ1 MATERIALS ELECTRICAL FUNCTION Case : thermoplastic UL94-V0 Actuator : polyamide 6/6 Bushing/bezel : polyamide 6/6 Contacts : silver, gold plated Terminal seal : epoxy APEM products may be recycled at end-of-life for the re-claiming of valuable Function 3 (NO) metal components. CILLFCT ECH0.9 MOUNTING STANDARD BEZEL MOUNTING REDUCED MODEL LE 15-11-2011 17.50 17.50 PANEL CUT-OUT PANEL CUT-OUT 20.00 20.0020.00 20.00 (.689) (.689) 12.90 (.787) (.787)(.787) (.787) 12.90 12.90 (.507) (.507) (.507) 2 1 1 13.60 (.535DIA) 13.60 13.60 (.535DIA)(.535DIA) 13.50 15.60 13.50 13.50 (.531DIA) (.614DIA) (.531DIA)(.531DIA) - Flat seal - O-ring CILPCILPE E CIMPE2 MATRIX MOUNTING - BACK OF PANEL SPACE REQUIREMENT MATRIX MOUNTING 17.50 17.50 20.00 20.0020.00 20.00 (.689) (.689) (.787) (.787)(.787) (.787) 12.90 12.90 12.90 (.507) (.507) (.507) CIMPE2 2 1 1 ECH1 le 29/03/2012 13.60 13.60 13.60 (.535DIA) CILPECILPE (.535DIA)(.535DIA) 13.50 13.50 13.50 15.60 (.531DIA) (.531DIA)(.531DIA) (.614DIA) ECH1ECH1 2 CILPCILPE E CIMPE2 le 15/1le 15/11/2011/2011 1 CIMPE2 ECH1 le 29/03/2012 CILPECILPE ECH1ECH1 le 15/1le 15/11/2011/2011 1 1.50min-10.00Max (.059MIN.-.393MAX.) 1.50min-10.00Max (.059MIN.-.393MAX.) PANEL SWITCHES 20.00 (.787) 20.00 (.787) 16.40 (.645) 16.40 (.645) 1.50min-10.00Max (.059MIN.-.393MAX.) 1.50min-10.00Max (.059MIN.-.393MAX.) 20.00 (.787) 0.80min-4.30Max 20.00 (.031MIN.-.169MAX.) (.787) 1.50min-10.00Max (.059MIN.-.393MAX.) 5.20 17.50 (.204) (.689) 4.55 (.179) 16.40 (.645) 16.40 8.70 (.342) (.645) 2.40 (.094) 20 (.787) 0.80min-4.30Max (.031MIN.-.169MAX.) 1.50min-10.00Max (.059MIN.-.393MAX.) 17.50 (.689) 20 (.787)